Positive Grid BIAS MODULATION, Руководство по эксплуатации продукта

Страница: 21 / 32

39 40
9. Shift
[Tremolo, Pan, Auto Swell]
Alters the LFO’s waveform so that it “leans” to the left or right. This has the effect of giving a
triangle waveform an abrupt (leaning left) or slow (leaning right) ramp up to its peak. For an LFO
with a square waveform, Shift increases (leaning left) or decreases (leaning right) the duration of
the LFO’s peaks. In practical use, listen to how moving the Shift control affects how your
modulation effect pulses.
[RingMod]
Sets the speed of the volume rise for a slow attack.
10. LFO
Adjusts the shape of the LFO waveform. Sine (Top left) and Triangle (Bottom left) usually provide
a more subtle and controlled effect, whereas Pulse (Top right) and Rounded Pulse (Bottom right)
add some stutter to the effect.
11. Output
Adjusts the overall output volume.
Power Module
The Power Module controls the output stage of the effect. You can switch among different
power-supply options ranging from 6V to 18V batteries.
1. Attack
Determines how quickly compression is
applied.
2. Release
Determines how quickly compression
ceases and the signal level recovers.
3. COMP
Adjusts the overall compression amount
sent to the selected battery module.
4. Output
Adjusts the output gain after compression.
5. Battery
Sets the input level (threshold) above
which compression begins. It is affected
by the level of the COMP control.
6V: -45dB~-30dB
9V: -35dB~-20dB
12V: -25dB~-10dB
18V: -15dB~0dB