Part 9
peripherals and must be disabled when the Posiflex peripherals are
disconnected.
Failure to follow the discipline would result in electric or fire
hazard and such consequences are not covered by product warranty!
OPENING CABLE COVER
Please follow steps sequentially with reference to pictures below to remove the
cable cover for Gen 5 or Gen 6 slim base models.
Step A:
Turn panel backward to most horizontal position
Step B:
Pull at the removal hollow toward the user
Step A:
Push lock/release lever for tilt angle adjust backward
Step B:
Turn panel backward to most horizontal position
Step C:
Pull at the removable cover toward the user
DISCONNECTING ALL CABLES
After removal of the cable cover, the connector area will be accessible then.
Please
first note orientations of every existing cable connection
and then
disconnect every cable properly before separating the main unit from the
adjustable stand assembly. Please note that the click lock spring has to be
pressed down prior to pulling out the connector such as the LAN port or the
CR port. Please also note that the fixing screws have to be loosened free prior
to disconnection such as the DB9 form COM ports or the VGA port. Please
always hold the connector head
instead of pulling on the cable wire when
disconnecting any connector. Failure to do this could damage the cable and
jack that is considered as an
artificial destruction. Damages due to incorrect
disconnection operation are not covered by product warranty!
SEPARATING MAIN UNIT
In order to settle the touch terminal properly in a point of sale system, all the
cable connections have to be routed through its base, either slim or universal.
A
C
A
B
B
