POSIFLEX KS - 6715 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 20

POSIFLEX KS - 6715 Скачать руководство пользователя страница 15

Part 15

WALL MOUNTING

The wall mount model is delivered without any base but with a wall mount kit.
Please  follow  the  installation
guide  that  comes  with  the  wall
mount  bracket  to  fix  the  wall
mount  bracket  on  wall  and  then
hang  the  main  unit  with  the
matching pegs into the matching
holes on wall mount bracket.

Please note that since there is no base for the  wall  mount  model there can be
no base installed device nor base mount kit. The area required for wall mount
application is determined by the main unit dimensions and is 378 mm in width
and 312 mm in height.

OPERATING SYSTEM RECOVERY

For KS systems preloaded with Windows XP Pro /POS Ready/ Win 7 on HDD,
Posiflex provides recovery DVD delivered with the touch terminal for the
preloaded operating system. The System Integrator shall take care of software
restoration after OS recovered. A Posiflex supplied USB interface COMBO
drive will be required for such action. Other brand CDROM drive may require
its own driver different from what supported in the recovery DVD.

Please use the recovery DVD in rescue operation only. Using it otherwise
may wipe out whatever stored in the HDD!

All upgrade devices drivers

needed for manual installation in usual way are available in the subfolder
“\drivers” in OS recovered HDD and the latest versions of these required
drivers will be available on our web: http://www.posiflex.com.tw. Then follow
instructions from your system integrator for software recovery.

WB-6000VB

Matching Pegs

Matching Holes

Round Part

Slot Part

«
...
13
14
15
16
17
...
»

Содержание KS - 6715





















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды