background image

 

 

Part 7 

of the system unit before pressing these 2 springs. The LCD and touch panel 
may flip forward by gravity and get or cause damage by hitting anything in 
front of the system unit. 

POWER ADAPTOR 

The powe r connector resides in the lower left 

corner of main connector area. Please make sure that the 
cable from the power adaptor is inserted into the power 
connector of HT system in the correct orientation as 
illustrated in right drawing. The manufacturer is not 
responsible for any damage caused by improper 
orientation of this connection. Please check that for 
straight type power plug the arrow mark on the plug is 
at top side of the plug. For right angled power plug, if 
the arrow mark is on its end, it should be pointing up. If 
the arrow mark is on one side of the right angled power 
plug, it should be on the right as in the drawing. Please also check that the city 
power supply specification from the wall socket is within the operation range 
of the power adaptor. 

WIRELESS LAN (OPTION) 

When the wireless LAN option is ordered with the HT system, this 

option is already installed in the delivery inside the back cable cover with its 
cable connected to one of the USB port. This cable 

must be disconnected 

first

 if installed whenever the back cable cover is opened for any operation. 

UPS BATTERY (OPTION) 

When the HT system is installed 

with the UPS battery, the UPS battery is in 
the carton at delivery. Please take it out and 
place it in the battery compartment at center 
upper part of the connection area indicated 
as upper rectangle in picture at right. 
Connect the cable to its connector in the 
main connection area beside the power 
connector 

only when the system is about to power up for operation

Always 

disconnect the UPS battery

 when the system is to be left powered off for 

more than few days. Please pay particular attention to the environment 
requirement for UPS battery in next chapter “USING THE HT SYSTEM”. 

AUDIO PORT

 

The audio output port must be connected to either the earphone or a 

pair of speakers with booster or amplifier if used. For the HT systems installed 
with the audio amplifier option, the speaker will be installed internally. 

UPS Battery Compartment 

UPS Battery Connector 

Содержание HT-2212 Pro Series





















Отзывы: