Part 10
control of the COM1 serial port.
Use the cable supplied with the Posiflex cash drawer (Part No.
21863018010) for connection to the CR port in HT system. This cable has a 6-
pole plug at one end and an 8-pole plug at the other. The 8-pole plug should be
inserted into the connector marked: “signal cable from POS Printer” at the rear
of the cash drawer. The 6-pole plug should be inserted in the connector marked
“CR” found in the main connection area in the system.
The user may also use the optional 2-in-1 cash drawer control cable
21863023800 to control 2 cash drawers in 1 port. It has a 6-pole plug at one
end and two 8-pole plugs at the other. The 6-pole plug should be inserted in
the connector marked “CR” found in the main connection area in the system.
Each 8-pole plug should be inserted into the connector marked “signal cable
from POS Printer” at the rear of one of the cash drawers. The cable lengths for
the two 8-pole plugs are different. Use the shorter one for the original cash
drawer “CR1” and use the longer one for the extended cash drawer “CR2” that
will be distinguished by the software command.
OPERATING SYSTEM RECOVERY
The operating system exists in the HDD in top of the system unit.
Once the software system on HDD collapses, it is possible to restore the
operating system onto a physically intact HDD with use of the Recovery CD
that comes with the preloaded operating system. Please follow the instruction
from your system integrator for system / software restoration. Follow the
instructions below for operating system recovery only if your system integrator
does not advise otherwise.
For the HT system preloaded with Windows system on HDD, Posiflex
provides recovery CD delivered with the hybrid terminal for the preloaded
operating system. The System Integrator shall take care of software restoration
after OS recovered. Use a Posiflex supplied USB interface external CDROM
drive for such action. Other brand CDROM drive may require its specific
driver different from what supported in the recovery CD.
Please use the recovery CD in rescue operation only. Using it
otherwise may wipe out whatever stored in the HDD!
All upgrade devices
drivers needed for manual installation in usual way are available in the
subfolder “\drivers” in OS recovered HDD and the latest versions of these
required drivers will be available on our web: http://www.posiflex.com or
http://www.posiflex.com.tw.
Now please follow instructions from your system integrator for
software recovery after OS recovery and driver installation.
