POS-X EVO 2D Скачать руководство пользователя страница 127

Страница: 127 / 141

11 - 1

Customer Support

Technical Assistance

Contact information for technical support, product service, and repair can be
found at

www.pos-x.com

Limited Warranty

POS-X warrants its products to be free from defects in materials and workman-

ship and to conform to POS-X’s published specifications applicable to the prod-

ucts purchased at the time of shipment. This warranty does not cover any

POS-X product which is (i) improperly installed or used; (ii) damaged by accident

or negligence, including failure to follow the proper maintenance, service, and

cleaning schedule; or (iii) damaged as a result of (A) modification or alteration

by the purchaser or other party, (B) excessive voltage or current supplied to or

drawn from the interface connections, (C) static electricity or electro-static dis-

charge, (D) operation under conditions beyond the specified operating parame-

ters, or (E) repair or service of the product by anyone other than POS-X or its

authorized representatives.
This warranty shall extend from the time of shipment for the duration published

by POS-X for the product at the time of purchase ("Warranty Period"). Any

defective product must be returned (at purchaser’s expense) during the War-

ranty Period to POS-X factory or authorized service center for inspection. No

product will be accepted by POS-X without a Return Materials Authorization,

which may be obtained by contacting POS-X

. In the event that the product is

returned to POS-X or its authorized service center within the Warranty Period

and POS-X determines to its satisfaction that the product is defective due to

defects in materials or workmanship,POS-X, at its sole option, will either repair or

replace the product without charge, except for return shipping to POS-X.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE

FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR

WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN,

INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-

INFRINGEMENT.
POS-X’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY

UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT

OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS. IN

NO EVENT SHALL POS-X BE LIABLE FOR INDIRECT, INCIDENTAL, OR CON-

SEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF

POS-X ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUN-

DER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON

CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL

AMOUNT PAID TO POS-X FOR THE PRODUCT. THESE LIMITATIONS ON

LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN

POS-X MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES,

LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO

Содержание EVO 2D














































































































































Результаты поиска

Содержание EVO 2D

Отзывы:

Бренды по названию

Популярные бренды

POS-X EVO 2D, Руководство пользователя

Результаты поиска

Содержание EVO 2D

Отзывы:

Бренды по названию

Популярные бренды