Troubleshooting
NANO-8045 User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get NANO-8045 running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
DC 12V Power Input
5.2 BIOS
Setting
It is assumed that users have correctly adopted modules and connected all the device
cables required before turning on DC 12V power. 200-pin DDR2 SO-DIMM,
keyboard, mouse, SATA hard disk, VGA connector, device power cables, 12V DC
power accessories are good examples that deserve attention. With no assurance of
properly and correctly accommodating these modules and devices, it is very possible
to encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with NANO-8045, it is recommended,
when going with the boot-up sequence, to hit “DEL” key and enter the BIOS setup
menu to tune up a stable BIOS configuration so that you can wake up your system far
well.
