Portos ZF3000 C80, Инструкция по установке и обслуживанию

Страница: 6 / 14

20. Screw/ rivet the safety plate with the assembled sides
to the pre-assembled wall handles with extensions .
6
19. Put the safety plate against the assembled structure in
order to fit the elements precisely .
INSTALLATION WITH A GUIDING CORD
Dimensioning - ZF3000 external blind
cord leading, installation in the window recess
So
Wz
=
W
o
EXPLANATIONS TO DIMENSIONING :
Sz - blind width (slat width), So - hole width
Wz - blind height, Wo - hole height
Sz = So - installation clearance (1 cm per side), Wz = Wo
Dimensioning - ZF3000 external blind
cord leading,
installation on the facade
/flush-mounted
So
W
o
Wz
Wp
EXPLANATIONS TO DIMENSIONING :
Sz - blind width (slat width), So - hole width
Wz - blind height, Wo - hole height, Wp - package height
Sz = So + slat overlap on the facade, Wbo - height of the safety plate
Wz = Wo + Wp* or Wbo
INSTALLATION ON THE FACADE: Sz = So + slat overlap on the facade
FLUSH-MOUNTED: Sz = window width**
2. In the case of dimensioning, the dimension smallest from the measurements taken is the right dimension .
3. The installation place of wall handles should not interfere
with the proper functioning of the blind lifting and lowering
mechanisms (crank, motor). The maximum distance
between the handles should not exceed 800mm .
4. Screw the top rail handle to the mounted wall handle.
max. 800mm
ZF3000 EXTERNAL BLIND INSTALLATION
* - When adding the package height and subsequent adding a higher safety plate - the plate may enter the frame opening/hole.
** - It is recommended to take into account the installation clearance for free operation of the blind.
Machining of the installed blind and guides must allow subsequent service access requiring the removal of the guides.