13.
Slide the guides into the package, then slide the guides into
the adapter from the side. Drill a hole with a ø
2
mm drill in the
guide and the first wall of the adapter (1), fasten it to the adapter
with the
2
.5x6 screws included in the set (2)
.
12.
Close the top rail handles and tighten the screws
.
11.
Install the blind package into the open handles in such a way
that the "WINDOW SIDE" label with information about the
installation side, is on the window side
.
14.
Screw the bottom end caps to the guide with the
3x16 mm screws included in the set
.
15.
Check the correct installation of the blind, adjust if necessary
.
16.
Depending on the height of the safety plate, set the safety
plate extensions (1) to the correct height and fasten them to
the handles using the screws, from the inside of
the box as
shown above
.
17.
Drill holes (1) in the safety plate where the plate is
mounted to the handles and extensions, then use 4x8
rivets (2)
.
18.
Insert the sides into the box
.
11
2.
2.
2.
1.
1.
ZF3000
EXTERNAL BLIND INSTALLATION
1.
Содержание ZF3000 C80
Страница 1: ...R INSTRUCTIONS FOR INSTALLATION AND SERVICE OF ZF3000 EXTERNAL BLIND ...
Страница 2: ......