In Commercial Confidence
16
284 Enter point Geofence 4
285 Enter point Geofence 5
286 Enter point Geofence 6
287 Enter point Geofence 7
288 Enter point Geofence 8
289 Enter point Geofence 9
290 Enter point Geofence 10
291 Enter point Geofence 11
292 Enter point Geofence 12
293 Enter point Geofence 13
294 Enter point Geofence 14
295 Enter point Geofence 15
296 Enter point Geofence 16
297 Enter point Geofence 17
298 Enter point Geofence 18
299
Enter point Geofence 19
GROUP C In-vehicle INPUTS event
259 (in-vehicle control INPUT2/TG+)
Example: if the STATUS BIT ‘17’ has been changed from ‘0’ to ‘1’, the ‘EVENT 259’ will be generated and sent to the
server.
260 (in-vehicle control INPUT2/TG+)
Example: if the STATUS BIT ‘17’ has been changed from ‘1’ to ‘0’, the ‘EVENT 260’ will be generated and sent to the
server.
255 Out of the defined temperature scope
Example: if the temperature is 80
o
c and over the defined maximum temperature 40
o
c, the ‘EVENT 255’ will be generated
and sent to the server.
256
The temperature within the defined temperature scope
257
TL sensor triggered
Command ACK event
402 GPRS connection request (SMS command)
403 GPRS disconnection request (GPRS command, let the UNIT go into GSM mode.
405 Store forward was cleared
406 Read the Unit’s firmware version.
407 Check the UNIT Geofence status.
408 Read external battery level
Report Setup ACK event
501 Setup the time interval for the ‘keep alive’ procedure
502
Setup the Circular Geofence or Immediate Geofence parameters
508 Setup sleep mode parameters
531 Setup fixed time report
532 Setup Intelligent report
533 Setup Intelligent history report
534 Setup the Maximum speed limit
