
In Commercial Confidence
14
3.
Question: What are circle geofence and point geofence?
Reply: Geofence is just a position check idea. Circle Geofence uses a pre-defined radius and a GPS position center
to check a target’s current position and judge whether it is beyond the setting circular scope or not. It may
report when a status change detected. The Point Geofence only compare its current GPS coordinate with
the predefined one. It may send out a report when it is closing to the checkpoint or away from it.
4.
Question: What is the difference among the three connectors on main board?
Reply: The 3 pin connector is for PC-SETUP; user may connect the unit and PC together by this interface. The 5
pins and the 6-pin connector is for firmware downloading or debug, user do not need to care them.
5.
Question: TLU100N can go to sleep mode when duty off and TL-sensor is not trigged for 5 minutes, but are they
independent?
Reply: The TLU100N system will enter sleep mode when all the following conditions met at the same time.
1): user has configured sleep function.
2): several minutes have elapsed since the latest trigger.
3): no connecting to external power.
4): User through wireless keypad registered TLU100N as duty-off state.
XIV.
APPENDIX
Appendix 1: Event code summary
GROUP A: (BASIC event)
101 Over the defined maximum speed limit
102 Self-diagnostic report
103 Course changes (direction changes) bigger than defined angles.
104 Exit defined Circular Geofence area0
105 Enter defined Circular Geofence area0
108 Fix time report
109 Fix distance report
110 Intelligent time and distance report
111 low battery report
112 External battery is removed.
114 Exit defined Circular Geofence area1
115 Enter defined Circular Geofence area1
118 Wakeup report
119
Block is open
120
Block is closed
124 Exit defined Circular Geofence area2
125
Enter defined Circular Geofence area2
128 external power connected
129 after 30 minutes system will shut down to protect internal battery
130
Power of wireless door sensor1 is low
131
Power of wireless door sensor2 is low
132
Power of wireless door sensor3 is low
133
Power of wireless door sensor4 is low
134 Exit defined Circular Geofence area3
135
Enter defined Circular Geofence area3
139
Tamper switch of temperature sensor is close
140
Tamper switch of temperature sensor is open