background image

Page 11

For technical questions, please call 1-888-866-5797.

Item 63387 
        

S

AFET

y

Op

ERA

TION

M

AINTENAN

c

E

S

ETU

p

Edger Operation

1.  If head is in horizontal position, pull back 

on Angle Lock, rotate head, and release 
Angle Lock.  

cAUTION!  Make sure Angle Lock 

locks in the new position.

Angle 

Lock

2.  To adjust head angle, press the Head Angle Button, 

adjust as desired, and release Button.  

cAUTION!  Make sure head angle 
locks in the new position.

Head 

Angle 

Button

3.  Clear the work area of all fragile objects and all 

objects that may be thrown during operation.  
Keep extension cord clear of work area.

4.  Remove the Blade Cover and keep it available.

5.  Make sure Trigger is released, then connect 

the Power Cord to the extension cord, 
see 

Using cord Hook

 on page 9.

6.  Squeeze the Trigger, and slowly move the 

spinning Line across the work area.

cAUTION!  DO NOT STRIKE THE HEAD, 
doing so may damage it and cause it to break.

7.  To prevent accidents, turn off the appliance 

and unplug it after use.  Clean, then cover the 
Trimming Blade with the Blade Cover and store 
the appliance indoors out of children’s reach.

Содержание 63387

































Отзывы: