Page 12
For technical questions, please call 1-888-866-5797.
Item 63387
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Maintenance and Servicing
procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Make sure that the power Switch/Trigger is in the off-position and unplug the appliance
from its electrical outlet before performing any procedure in this section.
TO pREVENT SERIOUS INJURy FROM AppLIANcE FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1.
BEFORE EAcH USE,
inspect the general
condition of the appliance. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE,
clean external surfaces of
the appliance with clean, moist cloth.
3.
WARNING! If the supply cord of this
appliance is damaged, it must be replaced
only by a qualified service technician
Replacing Nylon Line
1. Press in buttons on sides of Reel and
remove Reel Cover and Spool.
Reel
Reel
cover
Spool
Button
Figure A: Reel Assembly
2. Remove all old Line from Spool.
3. Find the middle of a piece (up to 9 feet)
RIƎ1\ORQ/LQH
4. Insert middle of line into groove on center of Spool.
Figure B: Insert Line
5. Wind both ends into grooves using slight
tension and following arrow direction.
Figure c: Wind Line
6. Insert Spool partway into Reel,
insert line ends through Reel holes and
pull line ends snug. Close Reel.
7. Reassemble Reel Cover onto Reel and make sure
that both buttons pop back into place.
