Porter 219 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 33 / 49

33
MODEL NO. 219
PULLEY ASSEMBLY INSTALLATION
The two pulley assemblies (along with the chain supports), are critical connections, which
must be thru-bolted to a load bearing wall with a minimum of two (2) 1/2" diameter weath-
er treated rods and building washers. The placement of the manual winch is left to the ar-
chitect's or owner's discretion, but it must be mounted a minimum of 7'-0" above the fin-
ished floor.
THRU-BOLT CONNECTIONS REQUIRED AT EACH ANCHOR
PLATE / WOOD PAD (SEE "GENERAL ANCHORING
LAYOUTS" AND "ANCHORING REQUIREMENTS."