Porter 219 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 13 / 49

13
To Be Provided by the installer:
Ƒ Scissor lift or scaffolding.
Ƒ Plumb bob with 12’ Gammon Reel ® or laser plumbing device
Ƒ Tape Measure (100’ preferable for measuring court lengths)
Ƒ Pencil
Ƒ Speed Square
Ƒ Drill
Ƒ Drill Bits (varies per installation)
3/8” Dia. for Hammer Hit Rivet on Extension Tubes
13/32” Dia. for 3/8” carriage bolts
17/32” Dia. for Wood Pads
9/16” Dia. x 18” Lg. for Thru-Bolting 12” Walls
11/16” Dia. x 18” Lg. for Typical 1/2” Dia. Adhesive Anchors
1” Dia. x 18” Lg. for Typical 3/4” Dia. Adhesive Anchors
Ƒ Wire Brush (for cleaning out 9/16” dia. bored holes)
Ƒ Air compressor
Ƒ Hammer (for rivet application)
Ƒ Level
Ƒ Plumb bob with 12’ Gammon Reel ® or laser plumbing device
Ƒ Sockets (1/2” and 3/4”)
Ƒ Open or box wrench (1/2” and 3/4”)
TOOLS and EQUIPMENT REQUIRED
OPTIONAL EQUIPMENT
ELEC00201000 - “Cheater” box for powering of
equipment during installation
Vice-Grips for a variety of special
Bolt Cutter
SAFETY ATTIRE TO BE WORN AT ALL TIMES DURING THE
INSTALLATION AND MAINTENANCE OF THE EQUIPMENT
Ƒ Remove all jewelry before commencing with installation or maintenance.
Ƒ Hard hat.
Ƒ Long jeans (no shorts).
Ƒ Steel toe work boots.
Ƒ Safety glasses.
Ƒ Leather gloves.
Ƒ OSHA approved harness (properly tethered).
Ƒ Nothing which may be caught by moving equipment such as long hair or baggy clothing.
Inventory parts listed on the packing list to ensure parts required are accounted for. Inspect all components
for possible shipping damage. Report any shortages to Porter's Customer Service Department immediately.
On visible freight damage, sign as damaged, and file a freight damage claim with the carrier immediately.
Failure to report shortages or hidden freight damage directly to Porter's Customer Service Department within
three working days will place the financial burden for the missing or replacement parts with the installer or
INVENTORY and INSPECTION