Porter-Cable 10 IN. (254 MM) JOBSITE TABLE SAW, Инструкция по эксплуатации

Страница: 9 / 40

9
CARTON CONTENTS TOOLS NEEDED FOR ASSEMBLY
Supplied Not Supplied
UNPACKING AND CHECKING CONTENTS
Carefully unpack the table saw and all its parts, and
compare against the list below and the illustration on the
next page. With the help of an assistant place the saw
on a secure surface and examine it carefully.
• To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of
power during unpacking and assembly. The cord
must remain unplugged whenever you are adjusting/
assembling the table saw.
• The table saw is heavy and should be lifted with
care. If needed, get the assistance of someone to lift
and move the table saw.
• If any part is missing or damaged, do not attempt
to assemble the table saw, or plug in the power
cord until the missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
WARNING
!
Flat bladed screwdriver
Adjustable wrench
and 13, 14 mm wrench
Phillips screwdriver
Straight edge
Combination square
Blade wrench
Blade wrench
ITEM DESCRIPTION QUANTITY
A. Handwheel handle hardware bag 1
B. Rear extension wing 1
C. Rear extension wing tube 2
D. Rear extension wing hardware bag 1
E. Riving knife storage (knob) 1
Blade guard storage, screws 1 set
Push stick storage holder 1
F. Hex bolts, washers 4 each
3 mm hex key 1
G. Rip fence 1
H. Blade guard assembly 1
I. Anti-kickback pawls assembly 1
J. Blade wrench 2
K. Push stick 1
L. Miter gauge 1
M. Blade 1
N. Table saw 1
O. Roller wheel assembly 2
P. Leg tube hardware bag 1
Q. Stand 1
3 mm hex key