9
Setting up and assembly
1
2
3
4
Leg Assembly
The four legs supplied can be used at the
discretion of the user. The advantage of using
them is twofold. Firstly they will extend the
area that the Scatterbird MK4 will be effective.
Secondly they will lift the main unit off the
ground, avoiding ground water. Attaching the legs
is quite simple.
Firstly align a leg with the moulded-in insert that
it will slide into. These all have an angle to them
as can be seen from the picture of the complete
unit.
Press the sprung loaded pips into the leg so you
can start to ease the leg into the main unit
(Photo 2 & 3). It can be easier to do this one pip
at a time, twisting the leg slightly to get the pip to
go in.
When the pips are in, the leg can be pushed as
far as it will go (Photo 4). You may well be able
to feel when the pips locate in a groove in the
inside of the moulded-in metal inserts. Repeat this
process for all four legs.
Leg Removal
If you want to remove the legs then they will pull
straight out, the sprung loaded pips releasing the
legs from the main unit.
