PortaCo WS-10-64-3, Руководство по эксплуатации, техническому обслуживанию и ремонту

Страница: 42 / 69

19
4.3 Care Requirements
Maintenance
CLEANING AND MAINTENANCE
RECOMMENDATIONS Wipe all
external surfaces after each use with
a clean, lint free cloth to remove
surface contaminants from the tool.
Daily:
1. Wipe all tool surfaces, fittings,
and coupling free of grease, dirt,
and foreign materials.
WARNING: DO NOT ATTEMPT TO
LOCATE HYDRAULIC LEAKS BY
FEELING AROUND HOSES AND
FITTINGS WITH HANDS. “PIN-
HOLE” LEAKS CAN PENETRATE
THE SKIN.
2. Inspect the tool signs of leaks
and worn, and/or damage
couplers. Replace if necessary.
3. To prevent contamination, always
install dust caps over the
hydraulic ports when
disconnected.
4. Inspect shear blades every day.
Replace as required.
Monthly:
Inspect the hold down assemblies for
wear or damage and replace any
components as necessary to
maintain a good working condition.
Hold down service kits:
64-4294-OOK Roller bearing
replacement kit
64-4295-OOK Hold down bolt
replacement kit
Annually:
Remove the hydraulic system guard
and inspect fittings and tubing for
damage and replace as required.
Check linkage between valve and
lever for excessive wear and replace
as required.
NOTE: Do not attempt to repair this
product. Only properly trained
person should perform any
maintenance, service, and or repair
to a tool.
COMPLETE DIASSEMBLY OF
THE TOOL IS NOT
RECOMMENDED. RETURN TO
PORTACO, INC. FOR REPAIRS.