PortaCo WS-10-64-3, Руководство по эксплуатации, техническому обслуживанию и ремонту

Страница: 11 / 69

11
Figure 3.2A
The valve lever operating instruction
decal is located to the right of the
control and instructs the operator to
"PUSH TO SHEAR, AUTOMATIC
RETURN".(figure 3.2B)(figure 3.2F
arrow B)
Figure 3.2B
The "WARNING' decal indicates a
practice which if conducted could
result in injury to the operator or
bystander, or damage to the tool.
Follow the instructions "DO NOT
OPERATE SHEAR WITHOUT
SHIELD IN PLACE" and "DO NOT
STRIKE HOLD DOWNS" printed on
this decal. (figure 3.2C) (figure 3.2F
arrow C).
Figure 3.2C
The mounting instructions decal is
also located on the guard cover. It
states the correct procedure for
adjusting the hold down rollers.
It tells the operator to "ADJUST
ROLLER CLEARANCE TO 1/8"
BELOW BALL OF RAIL". (figure
3.2D)(figure 3.2F arrow D)
Figure 3.2D
On the inside of the far side of the
frame, is a serial # decal. This decal
has the serial number as well as the
model number of the unit. Each unit
has it’s own unique serial number. It
is important to keep this decal
protected and kept legible. The
serial number is needed when
ordering replacement parts.
(figure 3.2E)(figure 3.2G arrow E)