Porsche Cayenne, Руководство пользователя

Страница: 149 / 420

Controls, Safety, Instruments
149
Automatic mode
f Press AUTO button C .
Indicator light in button lights up.
Air quantity and distribution are automatically
controlled and variations are compensated.
Note on operation
If necessary, the automatic system can be manu-
ally influenced.
This manual setting is retained until the appropri-
ate function button is pressed again or the AUTO
button is pressed.
Switching MONO function on
The temperature settings for the driver’s side can
be accepted for the entire vehicle.
f Press AUTO button C for 2 seconds.
The MONO logo appears on the air-condition-
ing display panel.
Ending MONO function
f Press AUTO button C for 2 seconds or
f Change the settings in the air-conditioned are-
as.
Setting temperature
To suit personal comfort, the interior temperature
can be adjusted between 61°F and 85°F (16°C
and 29.5°C).
Recommendation: 72°F (22°C)
f Push temperature button up or down.
Button
H
: left side of vehicle
Button O : right side of vehicle
The selected temperature is shown on the
display above the button.
If “LO” or “HI” appears on the display, the system
is operating at maximum cooling or heating pow-
er. Automatic mode is switched off.
If the preselected temperature is changed, the air
quantity blowing out can adjust automatically in au-
tomatic mode.
The desired temperature is reached more quickly
this way.
f Push button G up or down to adjust the air
quantity.
The selected air quantity is shown in a bar
display on the display above the button.
f Press AUTO button C to return to automatic
mode.
If the air quantity was reduced so much that “OFF”
appears on the display, the outside-air supply is in-
terrupted.
Warning!
Risk of accident due to impaired vision. If the
air quantity is “OFF”, the windows may mist
up.
f Only select recirculating-air setting for short
periods.
f If windows mist up, turn off the recirculating-air
setting by pressing the circulating-air button
briefly and select the function “Defrost wind-
shield“.
f
Push button
G
up (to increase air quantity).
Setting air quantity