Porsche 911 CARRERA 4 - Скачать руководство пользователя страница 287

Страница: 287 / 355

Wheel Bolts

General information

Danger!

Risk of wheel bolt breakage and wheel

separation, resulting in serious personal

injury or death.

Follow all instructions concerning wheel bolts.

Always clean the wheel bolts before fitting.

Apply a thin coat of

Optimoly TA

(aluminum

paste) on the thread and between the bolt

head and movable spherical cap ring (

arrows

The bearing surface of the spherical cap

facing the wheel must not be greased.

Replace damaged wheel bolts. Only use

the Original Porsche wheel bolts specially

designed for this vehicle type.

Tightening torque

Tightening torque of wheel bolts and wheel nuts:

130 Nm/96 ftlb.

Wheel Securing Bolts

If the wheels have to be removed at the workshop,

please do not forget to hand over the wrench

socket for the wheel securing bolts along with

the car key.
The wrench socket for the wheel securing bolts is

in the tool box.
To loosen or tighten the wheel bolt with anti-theft

protection, a wrench socket with the appropriate

coding must be used between the wheel bolt and

the wheel-bolt spanner.

When positioning the wrench socket, ensure

that it engages fully in the teeth of the wheel

bolt.

Note on operation

On vehicles with 17 mm spacers on the rear

axle, the wheels are secured with wheel nuts.

On request, separate anti-theft protection for the

wheel nuts can be mounted. Please consult an

authorized Porsche dealer.

Practical Tips, Emergency Service

285

Содержание 911 CARRERA 4 -




































































































































































































































































































































































Результаты поиска

Содержание 911 CARRERA 4 -

Отзывы:

Бренды по названию

Популярные бренды

Porsche 911 CARRERA 4 -, Руководство пользователя

Результаты поиска

Содержание 911 CARRERA 4 -

Отзывы:

Бренды по названию

Популярные бренды