Porsche 911 CARRERA 4 - Скачать руководство пользователя страница 103

Страница: 103 / 355

Cooling System

Temperature gauge (ignition on)

USA: Display in



Canada: Display in



Pointer to the left

- engine cold

Avoid high engine speeds and heavy engine

Pointer in the middle

- normal operating temper-

ature
The pointer may move up to the red area when

engine is heavily loaded and outside temperature

is high, but should return to “normal” when engine

load is reduced.

Warning light “A”

If the

coolant temperature

is too high, the

warning light

comes on

. Additionally, a warning

is displayed in the on-board computer.

Pull off the road, turn off the engine and allow

to cool.
Check radiator and air passages in front end of

car for obstructions.
Check coolant level. If necessary, add coolant

and have fault remedied at an authorized

Porsche dealer.
Please observe the chapter ”COOLANT

LEVEL” on page 233.

Note

To prevent excessive temperatures, the cooling-air

passages must not be restricted by coverings (e.g.

films, “stone guards”).
If the

coolant level

is too low, the warning light



ashes

. Additionally, a warning is displayed in the

on-board computer.

Switch engine off and allow to cool.
Add coolant.
Have the cause of the fault remedied at an

authorized Porsche dealer.

Please observe the chapter ”COOLANT

LEVEL” on page 233.

Caution!

Risk of engine damage.

If the warning lights come on even though

coolant level is correct, do not continue

driving.
Have the fault remedied at the nearest

authorized Porsche dealer.

Engine compartment blower fan

In addition, this warning light



ashes

to indicate a

fault in the

engine compartment blower fan

Have the cause of the fault remedied at an

authorized Porsche dealer.

Controls, Instruments

101

Содержание 911 CARRERA 4 -




































































































































































































































































































































































Результаты поиска

Содержание 911 CARRERA 4 -

Отзывы:

Бренды по названию

Популярные бренды

Porsche 911 CARRERA 4 -, Руководство пользователя

Результаты поиска

Содержание 911 CARRERA 4 -

Отзывы:

Бренды по названию

Популярные бренды