background image

!

!

!

14

15

Every time before you use your bike

Please ensure that you only use the bike as described  
in the chapter “Proper use”. Please take note of the  
intended use as indicated in this chapter and the maxi-
mum overall weight of your bike. It is important that you 
inspect your bike each time before using it to ensure 
that it is functioning properly. As a minimum you should 
complete the following checks:

Quick release

Please check the quick releases on the front wheel 
axle, rear axle and seat post. 

Check to make sure the wheels are securely mounted 
and that the seat cannot be twisted.

Wheels and tyres

Check that the tyres and wheels are in good condi-
tion. Check the tyre pressure with a pressure gauge. 
The air pressure may drop if the bike is not used for 
prolonged periods or as the result of transport. 

Make sure that both wheels spin freely and check  
the wheels’ radial run-out. Wheel run-out may be  
attributed to defects in the tyres, the spokes or hub.

Brakes

Before using the bike for the first time, check the 
brakes. First check the location of the hand brake lever. 
In countries with right-hand traffic, Porsche Bikes are 

shipped such that the left brake lever controls the  
front wheel brake and the right the rear wheel brake.  
In countries with left-hand traffic, Porsche Bikes are 
shipped such that the right brake lever controls the 
front bike brake and the left brake lever the rear wheel 
brake. Determine the location of the front and rear 
wheel brake levers.

Hydraulic disc brakes are very effective and it is easy  
to overestimate how much pressure is needed to  
activate them. For this reason, you should test their  
effectiveness on a level, non-slip track that is removed 
from road traffic. Please read the chapter “Brakes”  
on p. 32 carefully. 

Sudden braking. 

Accidentally applying the front 

wheel brake may cause a crash. Familiarise yourself 
with the location of the front and rear wheel brake  
levers.

Impaired braking or brake failure. 

Defective or 

broken brakes may cause serious accidents. Check 
the function of the brakes each time before using  
the bike.

WARNING

DANGER

WARNING

PLEASE NOTE

For this reason, you should be absolutely sure to  
inspect your bike each time before using it.

Loose components. 

If quick releases are not closed 

securely, components may loosen and cause a crash. 
Check to make sure all quick releases are secure and 
if necessary, clamp them tight.

Содержание Bike RS












































Отзывы: