2
KFOB-C Remote-Control - Manual
Quick Start ........................................................................................................................................................................... 2
Product Description ............................................................................................................................................................. 2
Installation Guidelines ......................................................................................................................................................... 3
Behavior within the Z-Wave Network .................................................................................................................................. 6
Child Protection ................................................................................................................................................................... 6
Wake Up Intervals – How to communicate with the device ................................................................................................ 6
Node Information Frame ..................................................................................................................................................... 7
LED Control ......................................................................................................................................................................... 7
Associations ........................................................................................................................................................................ 7
Set and Unset Associations to Actuators ............................................................................................................................ 7
Configuration Parameters ................................................................................................................................................... 8
Technical Data .................................................................................................................................................................. 10
Explanation of Z-Wave specific terms ............................................................................................................................... 10
Disposal Guidelines........................................................................................................................................................... 10
Support .............................................................................................................................................................................. 10
Quick Start
This wireless Z–Wave remote controller can act in two different modes that are activated with the first configuration
action after factory default:
1.
Pushing
Button 1 for one sec.
(red/green blink) adds the KFOB to an existing network as
secondary
controller
.
o
The four buttons will send
activate 4 different scenes
(Central Scene Command) in the central
gateway (For this a Z-Wave control center is required. In an existing Z-Wave network the KFOB
is able to control up to 4 different scenes with its four buttons.)
2.
Pushing
Button 3 for one sec.
(green blink) adds a new Z-Wave actuator device to the KFOB who
becomes the
primary controller
of this new network.
o
The KFOB can even control devices without a central controller and will become primary
controller of an own Z-Wave network. The connected new device (actuator) can be controlled
using the two buttons left (Button 1 = up/on/open, Button 3 = down/off/closed).
After the first action you can further manage (add/remove more devices when primary; wakeup; reset to default) and
configure the KFOB using the management mode. To activate this management mode push all four buttons for one
second simultaneously (green blinks slowly). The buttons will have different functions then.
The device is battery-operated and can be mounted on every flat and dry surface.
Product Description
The KFOB remote controller is a 4 button Z-Wave device capable to act both as primary or secondary controller. The
four buttons can control other Z-Wave devices such as switches, dimmer and even door locks directly. Various
options – configurable by Z-Wave configuration commands – define the actions and the commands used for this
control. It is possible to use two sets of buttons (one for on/open/up and one for off/closed/down) or four single buttons
to control four different groups of devices.
The KFOB controller also allows triggering scenes in a central controller. Again different modes can be configured
to adapt to the various implementations of scenes in different central controllers in the market. Control options also
include special modes like „all on/off“ or always controlling the Z-Wave device in proximity to the controller.
Содержание KFOB-C
Страница 1: ...1 KFOB C Remote Control Manual 009204...
