Ponovo T200A, Руководство по эксплуатации оборудования

Страница: 15 / 61

T200A Hardware Operation Manual
15
4.2 How to select variable
In the test item interface, rotate the ENTER button (clockwise or counter clockwise) to
select the variable. The variable you selected will be displayed in white characters with
black background.
4.3 How to set parameters
When the variable was selected, press the
ENTER
button and rotate it clockwise or
counter-clockwise to change the magnitude of the variable. Select the step of parameter
changing by using the
Fast/Fine adjustment button. You may switch the step between
0.001, 0.1, 1 and 10 by pressing the button.
The parameter setting of action unit and manual unit:

Both before and after test, you may select certain variable to set corresponding
parameters

Both before and after test, you may press the Fast/Fine adjustment button to
change the variable output.
Other units can’t be changed with their parameters as soon as the test starts.
4.4 How to control output
The Run and Stop buttons are applied to control the tester of its output, or to stop it.