PONNDORF P delta 15, Руководство по эксплуатации

Страница: 22 / 33

PONNDORF Gerätetechnik GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation Manual
Hose Pump Series
P_delta / PD-S
Page 20 of 29
Version 003_GB / 04.2021
6.4 Installing the pump hose
The outer surface of the pump hose must be lubricated sufficiently with
Ponndorf Special Grease before assembling it.
Remove power from the pump by removing the main fuses before doing
any cleaning / maintenance / assembly operations.
Do not wear gloves during these operations because they may be
pulled in!
6.4.1
Pump hose and Special
Grease.
6.4.2
Insert fittings into the ends
of the pump hose. Make
sure that the slots in the
fittings point in the same
direction.
Then provide pump hose
with grease.
6.4.3
Closed pump without
hose.
6.4.4
Open the pump by moving
the black handle 180°.
6.4.5
Slide the first connector
into the guide (screw/slot).
6.4.6
Knurled nut should be
tightened if necessary.
CAUTION