After setting, hold down the
“
SET
”
button 3 seconds or leave it with no
operation 15 seconds, the system will save the parameter changes and
return to the working mode.
Note:
You can only set the basic Settings, leaving the advanced
Settings unchanged, and only change the advanced Settings parameters
if necessary.
Advanced Setting Mode
: Press & hold down
“
SET
”
key 3 seconds to
enter the advanced setting mode. You are able to set AL (Low Alarm
Temperature point), AH (High Alarm Temperature point), PT
(Compressor
Protection Time), CF (℃/℉ Display setting) and CA
(Calibration function) parameters. After settings, press & hold down
“
SET
”
key 3 seconds or leave it with no operation 15 seconds to save
parameter changes and return to working mode.
User Tips: 1)
Under setting mode, press
“
SET
”
key to cycle through all
parameter codes, press
“
▼
”& “
▲
”
to adjust the setting values below.
2)
Press & hold down
“
▼
” & “
▲
”
can adjust setting value more quickly.
Cooling
Heating
TL
TS
TH
