calculated right after the moment refrigeration stops.
6.4 Display in Celsius or Fahrenheit degree (CF)
Users can select display in Celsius or Fahrenheit degree unit according
to their needs. Default setting is
℃
.
Note:
when you select Fahrenheit unit, the display for over 100℉ will
be a whole number, resoluti
on becomes 1℉.
6.5 Temperature Calibration (CA)
When there is a deviation between measured temperature and actual
temperature, you can use the calibration function to align the
measured temperature and actual temperature. The corrected
temperature equals to temperature before calibration plus corrected
value (corrected value can be positive, 0 or negative value)
7.
Error Description
1) If LED displays flashing code AL or AH, please kindly check your
AL or AH setting in advanced setting mode. Buzzer will alarm until
temperature fall into setting range or any key is pressed (the flash
indication will continue unless the temperature goes into normal range).
2) If LED displays code ER, then sensor is in short circuit or open loop.
Please contact Poniie customer service ([email protected]) for
solution.
