ēno flex Installation Guide
6
Installation and Operation Guide
Suggested hardware per mounting application
NOTE
:
The following is a suggested hardware component list. All local codes and protocols should be
reviewed and followed when installing this product.
Follow all manufacturer directions and local code requirements for hardware instillation.
If mounting to a wood stud wall:
•
¼” lag screw with 7/16” hex head (11mm), 2.5” (64mm) long (for mounting to wood stud)
•
¼ - 20 Toggle bolts 2.5” (64mm) long (for mounting to sheetrock)
If mounting to a metal stud wall:
•
¼ - 20 Toggle bolts 2.5” (64mm) long (for mounting to metal stud or sheetrock)
If mounting to a hollow concrete block or hollow brick wall:
•
¼ - 20 Toggle bolts 2.5” (64mm) long (for mounting to hollow block)
If mounting to a solid concrete and solid brick wall:
•
¼” Concrete wall anchors 1-3/4” (45mm) long
-or-
•
0.145” (3.68mm) diameter x 1” (25.4mm) long Ram Set anchors
