ēno flex Installation Guide
PolyVision
3
Overview
The PolyVision ēno flex is a combination interactive whiteboard product that incorporates marker
panels, tack panels and the ēno interactive whiteboard all in one complete assembly.
Important considerations
•
Two people are recommended to ensure a safe installation.
•
Mounting hardware is not included with this product. Check local code for hardware requirements.
•
No unauthorized modifications or additions are to be made to the system.
•
Tighten all screws securely to ensure a safe installation.
CAUTION
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
Read the entire Assembly Direction before beginning installation or assembly.
Building construction varies greatly and is outside PolyVision’s control. The
Building’s Engineer of record is responsible for the design of studs, backing,
reinforcement, supporting members etc. which the units are attached to and must
verify the adequacy of the mounting hardware. These instructions and any
hardware provided by PolyVision are for convenience only and are not an
indication of what may be required by your local Code.
The building owner or designated agent is responsible for verifying that the
installation is in compliance with all local Codes and regulations.
If you have a problem, question, or request, call your local dealer or PolyVision at
800.620.POLY (7659) 678.542.3100 +32.089.32.31.30
