8
7.1 Pre-programming
The inputs and outputs of the device are programmed from the factory with a standard frequency
assignment (see supplement).
To receive the pre-programmed ASTRA transponders, the SAT inputs must be connected as shown in the
picture below.
Pre-programmed assignment
7.2 Input level
To ensure perfect reception, make sure that the level at the inputs is between
50 a
nd
80 dBµV
.
When receiving digital signals, it is advantageous to have a lower input level rather
than an excessively high one.
If the input level is too high, an attenuator must be used.
7.3 Output level
The output level at delivery is
90 dBµV
. This can be changed via device programming (see point 8.2.2
output parameters). At the TEST socket, an output level reduced by 20 dB is available.
Test Out
-20 dB
Out
112 - 860 MHz
NMS port USB port
19“ mounting angle
