18
Example IP address: 192.168.001.013
All changes are saved with
Save
.
Please note!
The listed IP addresses are intended as examples. All addresses must be adapted to the network at the
location. If this information is not known, the responsible IT specialist should be contacted!
The progress of saving is displayed on the status diagram.
This process can last for up to a minute.
Now close the program and remove the USB cable. Then connect the QAM 12 LAN to the network. All PCs
in the network can access to the QAM 12 LAN via
„SATC12“ software.
8.4.1 Creating headends
Start the program
–
SATC12
–
In the menu item
Control
, activate the submenu
LAN-Control
, to enable the control via LAN.
To create the connection settings of the QAM 12 LAN in the
Control
menu, select the submenu
Edit Headends
.
