43
8.11 Extras/additional adjustments
In certain applications, advanced settings and an intervention in the transport stream are necessary. In the menu
item
Extras,
settings can be made for these applications.
8.11.1 Function
“Password“
The menu item
Password Settings
allows changes of the access data to the device and with this an increased
access security. It is found in the menu item
Extras
.
Important:
Please make sure to note the serial number, as this is required to reset the password if
necessary. The serial number is displayed on the Overview window (Program Menu) or in the Password
menu.
Should the password be lost or forgotten, we are happy to help with the general password reset. For this we would
need the serial number of the device. The serial number can also be found on the label on the outside of the device
housing. The general password reset can only be done by POLYTRON. For this process we generate a new
password with which the device can be unlocked again.
Note:
The password protection is not activated ex-works and can be switched on from
μC-SW version 1.31.
After pressing the button
Password Settings
, the following input menu will be opened.
The activation of password function is done by selecting
Use Password
by tick.
Enter the password (min.6 / max.10 digits) in the input field
Password
(consisting of letters, numbers or special
characters in any sequence) and retype the password in the input field
Retype Password
.
Click on
Save
to store the password settings.
By clicking on
Change Password,
a new password can be created.
You can also deactivate the password protection by removing the checkmark in front of
Use Password
.
For this,
you need the password to log in first.
Exit the program
–
SATC12
– or continue with the settings if necessary.
The next time that the program
–
SATC12
– is started, please enter the password in the input field and then click
OK
to confirm the password or click
Cancel
to correct the password, if required.
