11
8.2 Programming of the device parameters
Start the program
–
SATC12
–
Click on
Menu
at the top left
The following menus are available:
Program Menu
Diagnostic
Firmware Update
Exit
Select
Program Menu
: All adjustments of the input and output parameters are carried out here. After calling up the
menu, the current parameters of all 8 channels will be displayed.
Via this menu all settings of the input and output parameters can be done. The upper part of the menu shows the
device data such as type, serial number, hardware version and software versions for CPU (µC), CI, FPGA and MUX.
The right menu border contains the navigation buttons
CHANNEL 1 - 4 a
nd
CHANNEL 5 - 8
, which are used to call
the transponder/output specific data of the respective 4 channel strip. Via the button
Multiplexing,
the multiplexer
menu will be opened.
