
36
3.4.2 Printhead Setting
Nozzle switch:
Two lines of nozzles of each printhead (left, right); user can select to use
left/right/double nozzle(s). (Note: use single channel will save half ink drops, so the darkness will
be lighter).
Pre-purge:
User can choose double nozzles, working nozzle. When Pre-purge function
is ON, printer will spray a little ink at optioned level during idle period in printing process to keep
nozzle plate warm and moist so as to eliminate dried ink phenomenon. Five levels to choose from:
Close, Low, Middle, High, and Custom. At separated mode, can set the P1, P2 pre-purge
separately.
Default setting is closed.
While setting is low, middle or high, pre-purge parameters will be set automatically
according to the ink type.
While setting is Custom, user can set the interval from 1 to 3600. For example, input 10
seconds, after start the printing and before sensor signal, every 10 seconds printer will spit some
ink drops to make nozzles wet.
Object width
:
Input object’s width, then the pre-purge will not work at setting range.
At separated mode, can set the P1, P2 object’s width separately.
Pre-print
:
When turn on this function
,
the printer will spray ink to wash nozzle each
sensed time. This function only can work at pre-purge mode.
3.4.3 Printing Option
Output Counter:
numbers already printed. User can set
0
-
999999999999.
After being
modified, counter will run based on the new value.
Counter Reset:
Every time user prints a message which contains a counter, system will
ask if to reset the counter after this printing, if select “Yes”, then from next printing counter will
run from the minimum value, if select “No”, counter will continue from current value.
Print Cache:
Message quantity saved in system memory, value can be1-20, if set to 1,
will print by real time.
Clean buff:
When turn it on, after start print, the printer can clean converted data and
reconverted it. When turn it off, after start print, the clean buff button will hide. Default is closed.
Содержание S3i
Страница 1: ...Edition A01 S3i High Resolution Inkjet Printer User Manual...
Страница 2: ...2 Revision History...
Страница 54: ...54 Delete delete the type long press will delete all the content in the input box Newline input in next line...
Страница 60: ...60...