
33
the point when printing starts. User can adjust the value to alter the print position on printing
object.
Default delay is 25mm. Value within 0-1000mm, down to the first decimal point. Click
,
save the setting and go back to previous menu, or click
to quit without saving. Setting
modification will be valid from next printing message. Delay value also can be set after printing
started. (When choose separated mode, user can set P1, P2 print delay separately.)
3.3.3 Initial Setting
Note:
This function only valid while message contains counter /text source. After
printing started, this setting is not settable.
Counter
Current Value: the value will be printed after start printing, value need to be within the begin
value and end value.
System: User can choose the system in the pull-down menu.
Repeat Index Value: The next printing is the N time of the repeat value. The repeat value of
counter source need to be nonzero.
Text source:
can modify the text content, the next printing content will be changed after
saving the settings. Maximum is 100 fonts.
3.3.4 Printing Monitor
After start printing of a message which contains dynamic source (counter, shift, date time,
device info), click
【
Monitor
】
to check printing data and coming data.
Dynamic source information will be displayed by sequence, user may pull down the menu
to check if data quantity more than 5pcs.
The display sequence can be manually selected: click
【
Pull down
】
, select the data.
Click
【
Off
】
, will close the monitor.
Содержание S3i
Страница 1: ...Edition A01 S3i High Resolution Inkjet Printer User Manual...
Страница 2: ...2 Revision History...
Страница 54: ...54 Delete delete the type long press will delete all the content in the input box Newline input in next line...
Страница 60: ...60...