
20
3) Counter source
【
Edit
】
Initial Value
: begin value of the counter, range from -999999999999
~
+999999999999
Maximum Value
: Maximum value, range from -999999999999
~
+999999999999
Repeat Value
: The print times of each value, range 0
~
9999(0 mean not repeat print).
Step Value
: Set counter step number.(for example: step value is 3, counter will be 1, 4, 7,
11…)
Carry System
: Default is DEC, user can select different carry systems, if need to add a new
one, click
【
Edit
】
System List:
Show the default and new built system. It can display a maximum of 5
(including the default base)
New:
Click “new” popup the system editing interface. Enter into the system name and
content, click Save to save the system to the list.
Edit:
Selected the system, click “edit” popup the editing interface, click “save” to save the
changes. The default system cannot be edited.
Select All:
All system in the list was chosen; Click the switch again change to all don't
choose, all not to choose.
Delete
:
Select the newly systems can be deleted. The default system cannot be deleted
Closing system management:
Click on close, out of management interface and save
existing system.
【
Other
】
Carry Source:
Click the pull-down menu to check the added counter.
Set the counter which the carry is based on (e.g there are counter 1 and counter 2, set the
carry source of counter 2 to be counter 1, then only after counter 1 reached to the maximum value,
counter 2 will carry over.)
Current Value:
Set the current value of the counter, value should be within the begin value
Содержание S3i
Страница 1: ...Edition A01 S3i High Resolution Inkjet Printer User Manual...
Страница 2: ...2 Revision History...
Страница 54: ...54 Delete delete the type long press will delete all the content in the input box Newline input in next line...
Страница 60: ...60...