PolyScience CHEF Series, Руководство пользователя

Страница: 19 / 19

18 www.sousvideprofessional.com
Restore factory defaults. To reset your Circulator to all factory settings,
unplug the unit from the electrical outlet and plug it back in again while
pressing either the (for degrees C) or the (or degrees F).
Disposal.
This equipment is marked with the crossed out wheeled bin symbol to
indicate that it must not be disposed of with unsorted waste.
It is your responsibility to correctly dispose of this equipment at
lifecycle-end by handing it over to an authorized facility for separate
collection and recycling. By doing so, you will help to conserve natural
and environmental resources and you will ensure that your equipment is
recycled in a manner that protects human health.
Please contact PolyScience.
For recipe ideas, instructional videos, and free downloads visit
www.sousvideprofessional.com
.
REGULATORY COMPLIANCE AND TESTING
Part numbers beginning with “SVPR”
120V units
:
ETL Intertek: Conforms to UL STD 1026, Certified to CAN/CSA STD C22.2 No. 64.10
240V units :
CE: Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC,
IEC 61010-1-2001, EN 61326:2006 Emissions, EN 61326: 2006 Immunity
Part numbers beginning with “SVC”
120V units
:
ETL Intertek: Conforms to UL STD 197, Certified to CAN/CSA STD C22.2 No. 109
ETL Sanitation: NSF / ANSI 8
240V units :
ETL Sanitation: NSF / ANSI 8
CE: Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC,
IEC 61010-1-2001, EN 61326:2006 Emissions, EN 61326: 2006 Immunity