PolyScience 150 SERIES, Руководство пользователя

Страница: 16 / 21

15 PolyScience Vacuum Sealing Systems
TROUBLESHOOTING
Vacuum Sealer will not turn On .
• Unit not plugged in . Check that the electrical cord is plugged
into a working, grounded electrical outlet .
• Damaged or worn electrical power cord . DO NOT USE UNIT;
RETURN FOR REPAIR .
Vacuum Sealer does not pull a complete vacuum with bags .
• Edge of bag not across Seal Wire . Properly position bag .
• Open end of bag not inside the Vacuum Channel . Make sure
that open end of bag is completely in Vacuum Channel .
• Wrinkles in bag along Seal Wire . Smooth out bag .
• Sealed end of bag (from roll) not completely sealed . Check
for gaps or flaws in seal .
• Crumbs or other debris on bag, Seal Wire or Chamber Seal
Gasket . Clean as required .
Heat-seal bag loses vacuum after being sealed .
• Bag punctured . Sharp items can put small holes in bags .
Cover sharp edges with a paper towel and vacuum package
in new bag .
• Out-gassing . Some fruits and vegetables can release gases
if not properly blanched or frozen before packaging . Open
bag and check for spoilage . If spoilage has not yet begun,
consume immediately .
WARNING : If spoilage has begun or if in doubt,
discard immediately . DO NOT CONSUME .
!