PolyJohn SH1 Fleet Series, Инструкция по сборке

Страница: 3 / 12

SH1-1 Assembly - July 2012
Page 3 of 12
GENERAL OVERVIEW
•These instructions are for showers shipped unassembled. Please retain these instructions for maintenance and repair purposes.
•The SH1-1 Model shower assembly will require two people.
•All references to left, right, front and rear are as viewed from the front of the shower.
•Review the entire instruction manual prior to assembly.
•Please follow the instructions in the order they are presented.
•When using air operated screw drivers or impact wrenches, be sure that the torque setting does not exceed 28 inch pounds.
Also, when using a battery-operated drill, set it to the lowest torque setting.
•We strongly suggest that these showers, as with all portable structures, be transported and handled with care. Dropping the
shower when loading and unloading could cause damage to the door jamb and other components.
~~TOOLS REQUIRED FOR ASSEMBLY~~
• Rivet Gun • Standard Slotted Screwdriver • Phillips Crosshead Screwdriver • Vise-Grips • Pliers
• Tefl on Tape • (2) Tapered Awls • Drill with a 13/64” and 1” Drill Bit • Socket Wrench with a 7/16” socket
FULL SCALE FASTENER DRAWINGS
(18) PC-000192 Sems
(4) PC-000140 Lock Nut
(4) PC-000123 - Washer
(4) PC-000121 - Washer
(11) PC-000106 - Washer
(48) PC-000104 - Rivet
(3) PC-000100 - Rivet
(4) PC-000367 - Nylon
Push-In Fastener
(4) PC-000159 - Screw
(6) PC-000102 - Rivet
(4) PC-000158
1-1/2” Long SM Screw
(2) PC-000147
3/4” Long SM Screw
(3) PC-000105 - Rivet