Sync – on/off,
Rate – from 8 to 1/32,
Time – from 1ms to 3500ms,
Feedback – from 0 to 70,
Bit depth – sample playback rate (from 16bit to 4bit),
Limiter properties:
Attack – from 0.001 to 1s,
Release – from 0 to 0.0100s,
Threshold – from 0 to 100%,
Screen
2/3
allows control and visual monitoring of the volume in dB and adding
Gain
to the
individual tracks and gives access to
Mute
and
Solo
for the desired tracks. It’s where it’s
possible to
rename
tracks.
Press and hold one or more screen buttons corresponding to chosen tracks and use
Arrow keys or Jog-wheel to adjust the volume,
Use the 8 screen buttons to Mute the corresponding tracks,
Use the Shift + corresponding screen button in order to Solo the selected track.
Press the red Rec one of eight screen buttons corresponding to the particular
tracks in order to
rename
it.
Screen
3/3
allows control and visual monitoring of the volume in dB and adding
Gain
for
Delay
,
Reverb
and
Dry Mix.
Also gives access to their
Mute
and
Solo
functions.
Press and hold one or more screen buttons corresponding to Send fx mixes and use
Arrow keys or Jog-wheel to adjust their volume,
Use the screen buttons to Mute them,
Use the Shift + corresponding screen button in order to use the Solo function,
Important:
Main Volume shortcut
> jog-wheel,
Shift + 1 to 8 screen button shortcut will also Mute each of 1 to 8 track in the Pattern
screen (not only from the 2/2 Master screen where Solo function works exclusively).
In the Master section – hold down more than one screen button pressed to edit more
than one corresponding value.
Reverb and Delay
Send fx
can be applied both on the
pre
and
post-volume fader
basis
(as a Config choice),
There are two different types of
Limiter
settings >
Subtle
or
Extreme
(as a Config
choice).
