While the song mode is playing back the rows of pattern’s tracks – toggle between the
Song mode and the Pattern modes.
While the sequencer is playing the song mode arrangement – use the Performance
mode to apply different effects “on the fly”.
External source MIDI clock and transport in the Song mode will playback the entire
song, while in Pattern mode will loop the current pattern.
Besides the onscreen Play Pattern and Play Song commands buttons use:
Play > plays a song,
Shift + Play > plays the highlighted slot/pattern,
Shift + Play on a selected slot/pattern clip >
preview
that certain selected
clip/track only.
When switching from the Song mode to Perform mode, the currently played pattern is
looped and a “random” indicator icon is displayed on the screen header. This way the
Performance mode indicates that tracks from different patterns can be mixed together.
Switch back to the Song screen and press
Continue song
to resume playing the entire
song.
Master section
https://www.youtube.com/embed/FYemJgp7oUE?feature=oembed
Located in the upper right corner
Master
key give access to three screens (marked in the
upper left corner of the screen
1/3
to
3/3
). Both all the eight
tracks
and
Send Fx volume
mixers
can be accessed here. The Master section is also allowing to
rename
the particular
tracks.
Screen
1/3
gives access to:
Volume – main/headphones stereo output volume level,
Reverb properties:
Size,
Damping,
Predelay,
Diffusion,
Delay properties (a number indicating the delay rate is corresponding to steps, eg > 16
means that one delay cycle will last for 16 steps):
Ping-Pong – on/off,
