![Polyend Tracker Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/polyend/tracker/tracker_instructions-of-use_1577812018.webp)
samples fast,
Replace an existing instrument by loading another sample to its position (all other
properties of the instrument remains the same).
The progress bar is showing the sample pool capacity in percents (displayed in white).
Red color displays the space needed to load a certain sample as an instrument. The
green color is showing when a replaced sample will free up some of the sample pool
time.
Use the originally attached in the kit dongle USB SD card reader or use the MTP (Media
Transfer Protocol) to copy existing samples to/from the SD card.
Shortcuts:
Left arrow in the left browser > takes to the very top of the browsed folder,
Use Shift + arrows > for batch selection (more than one file at a time),
Use Copy/Paste > for duplicating the Instrument,
Use the Insert/Home key as an Enter.
Instrument parameters and automation
https://www.youtube.com/embed/HdwiucFxDZs?feature=oembed
The
Instrument Parameters
key gives access to two screens (marked in the upper left
corner of the screen
1/2
and
2/2
).
Screen
1/2
– Instrument Parameters:
Volume (in dB + Gain),
Panning (from -50L to 50R),
Tune (from -24 to 24),
Fine-tune (from -100 to 100),
Filter type (disabled, low-pass, high-pass, band-pass),
Filter cutoff (from 0 to 100%),
Filter resonance (from 0 to 100%),
Effects – Overdrive, Reverb send & Delay send (from -inf to 0 dB).
Screen
2/2
– Instrument Automation:
Destination – the automation can be targeted to the following destinations:
Volume,
Panning,
Filter Cutoff,
Wavetable Position,