Polycom SoundPoint IP 650 Скачать руководство пользователя страница 93

Страница: 93 / 136

Customizing Your Phone

5 - 3

Select

Settings > Basic > Contrast

Press the

Down

soft keys, or the volume keys, to increase or

decrease the display contrast.

Press the

soft key to accept your changes.

Press

to return to the idle screen.

To adjust the contrast on the expansion module:

Perform the same steps as above, except press the

Down

soft keys

on the expansion module to change its contrast.

Changing the Backlight Intensity

Backlight intensity on the SoundPoint IP 650 phone has three components:

•

Backlight On

•

Backlight Idle

•

Maximum Intensity

You can modify the Backlight On Intensity and the Backlight Idle Intensity

separately. You can choose a high, medium, or low intensity, or turn the

backlight off entirely.
When you modify the Maximum Intensity, you are modifying the entire

backlight intensity scale. For example, if you decrease the Maximum Intensity,

the low, medium, and high values for the Backlight On intensity and the

Backlight Idle intensity will decrease proportionally.
If you have attached any expansion modules and you find the backlight levels

between them and your phone are incompatible, you can modify the

maximum backlight intensity for each unit individually to match all backlights

to an overall consistent level. Refer to step 8 below for details.
The backlight automatically turns on with any button, soft key, hookswitch,

USB, or telephony activity. After 20 seconds of inactivity, the backlight dims

to its idle intensity.

Содержание SoundPoint IP 650









































































































































Результаты поиска

Содержание SoundPoint IP 650

Отзывы:

Похожие инструкции для SoundPoint IP 650

Бренды по названию

Популярные бренды

Polycom SoundPoint IP 650, Руководство пользователя

Результаты поиска

Содержание SoundPoint IP 650

Отзывы:

Похожие инструкции для SoundPoint IP 650

Бренды по названию

Популярные бренды