Polycom SoundPoint IP 650 Скачать руководство пользователя страница 122

Страница: 122 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

6 - 4

Audio

Calling

Symptom

Problem

Corrective Action

There is no audio on the
headset.

The connections are not correct.

Do one of the following:

•

Ensure the headset is plugged into the
jack marked Headset at the rear of the
phone.

•

Ensure the headset amplifier (if
present) is turned on and/or the
volume is correctly adjusted. If the
amplifier uses batteries, check that
they are fully charged.

You are using a headset and the
people you call hear echo.

There may be an issue with the
echo cancellation feature of your
headset.

Do the following:

•

Press the

Menu

key, then select

Settings > Basic > Preferences >
Headset > Echo Cancellation

Using the arrow keys, select

Enabled

and then press the

Select

soft key.

•

Contact your system administrator.

Symptom

Problem

Corrective Action

There is no dial tone.

Power is not correctly applied to
the SoundPoint IP 650 phone.

Do one of the following:

•

Check that the screen is illuminated.

•

Make sure the LAN cable is inserted
properly at the back of the phone (try
unplugging and re-inserting the
cable).

•

If using in-line powering, have your
system administrator check that the
switch is supplying power to the
phone.

Dial tone is not present on one of
the audio modes.

Do one of the following:

•

Switch between Handset, Headset (if
present) or Hands-Free
Speakerphone to see if the dial tone is
present for one of audio modes.

•

If the dial tone exists on another audio
mode, connect a different handset or
headset to isolate the problem.

The phone is not registered.

Contact your system administrator.

Содержание SoundPoint IP 650









































































































































Результаты поиска

Содержание SoundPoint IP 650

Отзывы:

Похожие инструкции для SoundPoint IP 650

Бренды по названию

Популярные бренды

Polycom SoundPoint IP 650, Руководство пользователя

Результаты поиска

Содержание SoundPoint IP 650

Отзывы:

Похожие инструкции для SoundPoint IP 650

Бренды по названию

Популярные бренды