Field
Description
CallID
Global unique identifier of call
ConferenceID
Global unique identifier of call. If call is
a point to point, conference ID and call
ID are two different numbers
Dial string
What was dialed by the caller
Modified dial string
This is the dial string modified by
PathNavigator with the proper codes
that is sent to either an MCU or a
Gateway.
Terminate party
This which side (source or destination or
unknown) ended the call.
Terminate reason
The states are normal, abnormal or
unknown. The states are determined by
the disconnect message sent to
PathNavigator.
Q850 Code
Q.850 reason for disconnect. Please
refer to the table below to interpret
code.
Source IP
IP Address of source endpoint
Destination IP
IP Address of destination endpoint
Source H.323ID
H.323 ID of source endpoint
Destination H.323ID
H.323 ID of source endpoint
Source E164
E.164 alias of source endpoint
Destination E164
E.164 alias of destination endpoint
Q850
Codes
#
Code Description
1 Unassigned
Number
2
No Route To Network
3
No Route to Destination
4
Send Special Info Tone
5
Misdialed Trunk Prefix
6 Channel
Unacceptable
7
Call Awarded Delivery in Established Channel
8 Preemption
9
Circuit Reserved for Use
16 Normal
17 User
Busy
18
User Not Responding
19
No Answer From User
20 Subscriber
Absent
21 Call
Rejected
22 Number
Changed
26
Non Selected User Clearing
27
Destination Out of Order
28
Invalid Number Format
29 Facility
Rejected
30
Response To Status Enquiry
31 Normal
Unspecified
Copyright (c) 2004 Polycom Incorporated. All rights reserved.
Polycom, the Polycom logo design and ViewStation are registered trademarks, PathNavigator, Global Management System, and
iPower are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of
respective owners
3
