•
Additional filter for a CDR query has been added. Calls can be filtered based
on choosing whether the selected endpoint is the source, destination or both.
•
Export all records in CSV – This will export the raw data as shown in the
database. Note: The IP addresses will be unrecognizable and will need to be
converted using a hex converter. A mini application has been included to
help convert the IP address from numerical format to IP address format. It
can be found in the System_Update_Resources folder once PathNavigator has
been extracted.
Enhanced Routing Capabilities
•
PathNavigator now supports H.245 routing. The routing is not configurable
and set to system defaults.
Other Changes
•
The VPN/Internet network now has an upper limit bandwidth defaulted to –
2147 Tbps and the max bit rate for per call is 2147 Tbps. This value may be
adjusted downward.
•
PathNavigator can now bind to a specific Network Interface Card (NIC) when
the server that is running PathNavigator has more than 1 NIC.
S
ETTING
U
P THE
A
BILITY TO
C
REATE
R
EMOTE
V
IDEO
C
ALLS
T
HROUGH
Y
OUR
E
NTERPRISE
VPN
These instructions illustrate how to setup calling from a remote site that is part of an
enterprise VPN. Small Office Home Office Users that have their endpoints registered through
the VPN to their enterprise PathNavigator will now be able to create calls.
1.
When using ViaVideo (Release ver 5.1) that is connected to a VPN network, the “Use
VPN Address or Secondary Network Adapter:” and the “Automatically detect VPN
address…” must be selected. See pictures below.
Copyright (c) 2004 Polycom Incorporated. All rights reserved.
Polycom, the Polycom logo design and ViewStation are registered trademarks, PathNavigator, Global Management System, and
iPower are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of
respective owners
5
