Polycom IRK Wireless Server 2500, Руководство по настройке интерфейса

Страница: 56 / 124

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide Analogue Settings
51 Polycom, Inc.
Clip type Displays the caller ID
standard that is used.
FSK Clip Timeout Specifies how long the caller
ID is displayed on the
handset.
Seizure (bits) Specifies the number of
alternating bits used for
channel signaling.
Mark (bits) Specifies the number of
alternating bits used for
synchronization.
DTMF Tx Tone on time (ms) Specifies the length of the
dual tone (DTMF) for dialled
digit.
Tone pause time (ms) Specifies the pause between
two digits.
Level offset (dB) Increase/decrease the
default level of the DTMF
tones.
Recall Loop
Break Time The register recall time in
milliseconds. (R)
Ring Timeout If an incoming call is
terminated before it is
answered, then the KWS
needs to see that the call is
terminated by the far end.
This value specifies for how
long after the last ring
voltage, the KWS will register
that the incoming call does
no longer exist.
Dial Tone
Detect Timeout Specifies the number of
seconds to wait for a dial tone
before sending digits
regardless of whether there’s
a dial tone.
Number of
Busy Tone
Periods Periods The number of busy tone
periods.
Gain FSK(dB) FSK signal gain
DTMF(dB) DTMF signal
Table 6-1 Analogue Settings
Parameter Details Description