Polycom HDX 9002, Настройка

Страница: 25 / 38

Connect the HDX 9002 and VGA Splitter Cables
19
Connect the following cables to the VGA splitter:
a
Connect the VGA cable from the display
to the Output 2 port on the splitter.
b
Connect the VGA cable from the
Camera 4 input connector on the HDX
9002 to the Output 1 port on the splitter.
Once the cables are connected, attach the Velcro
to the bottom of the VGA splitter and then stick
the VGA splitter onto the upper shelf inside the
Media Center.
Connect the power cable for the VGA
splitter into the power connector on the
splitter, and then connect that power cable
to the power adapter cord.
Do not connect the power adapter cord to
a power outlet at this point in the installation.
5
INPUT
OUTPUT 1
OUTPUT 2
12V DC
ON
6
INPUT
OUTPUT 1
OUTPUT 2
12V DC
ON