Adjust Program Time
1)
Press
button twice, the LCD shows
the program status.
2)
Factory default status of the program is
disabled that means no program control.
Pressing
button once will enable the
program.
3)
In enable status, pressing
button will
select each of the program data to be adjusted.
At the
first
screen,
it
shows
the
start
time
of
the
Wake event of the program for Monday to
Friday.
4)
Use
or
button to change the
flashing
hours
to
the
desired
value.
5)
Press
button once to select minutes,
and repeat step 4) to change the minutes.
6)
If you do not want the event to happen press
button to disable it.
7)
Press
button again, the LCD will show
the temperature setpoint for cooling mode of
the event.
8)
Use
or
button to change the
setpoint in cooling mode to the desired value
or press
button to turn off the zone at
the start time in cooling mode.
9)
Press
button again, the LCD will show
the temperature setpoint for heating mode of
the event.
10)
Use
or
button to change the
setpoint in heating mode to the desired value
or press
button to turn off the zone at
the start time in heating mode.
Page 11
